Viper 3606V Guia de Instalação Página 17
- Página / 18
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
17
© 2009 Directed Electronics. All rights reserved.
Basic Remote Functions
See Owner’s guide for functionality details on both the LC and 1-way companion remote control.
Reset and Deletion
If a feature needs to be reset or the remote controls need to be deleted, use the following procedure.
Open a door.1.
Turn the ignition to the ON position.2.
Within 10 seconds, press and release the Control button: 2 times if you want to delete remotes or 3 times 3.
to reset features. These function steps are described next.
Delete remotes: This feature erases all remotes from the memory of the security system. This is useful
in cases when a customer’s remote is lost or stolen.
Note: This does not reset the programmed features of the security system.
Reset Features: This resets all features of the security system to the factory default settings.
Note: This feature does not delete the remotes from the security system.
Once you have selected the function step, press the Control button once more and hold it. The LED flashes 4.
and the siren chirps to confirm the selected functional step. Do not release the Control button
While holding the control button, press the 5.
A U X
button on the remote control. The unit chirps to confirm that
the feature has been successfully reset.
Once the feature is reset, the Control button can be released.
Note: For step 1, the + or - Door Trigger Input wire needs to be connected unless using an interface module
that supplies the door trigger through D2D.
Long Term Event History
The system stores the last six full triggers in memory. These are not erasable. To access long term event his-
tory:
With the ignition Off, 1. press and hold the Control button (on Control Center).
Turn2. the ignition On.
Release3. the Control button.
Within 5 seconds, 4. press and release the Control button. The status LED flashes in groups indicating the
last six zones that triggered the unit for 1 minute or until the ignition is turned off (indicated in the order
of most recent first to oldest last). Refer to Table of Zones.
Note: The Warn Away triggers are not stored to memory and is not reported.
- N3303 2009-12 1
- Contents 3
- Wiring Diagram 4
- Warning! safety first 4
- Wiring Connections 5
- Adjusting the Shock Sensor 6
- Pairing a Remote Control 7
- Programming System Features 8
- Feature Menus 9
- Bitwriter - Only Options 15
- Basic Remote Functions 17
- Reset and Deletion 17
- Long Term Event History 17
- Table of Zones 18
- Troubleshooting: Alarm 18
Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Viper 3606V
(36 páginas)
(19 páginas)Cisco CP-7925G-EX-K9= manuales
Manuales del propietario y guías del usuario para Teléfonos Ip Cisco CP-7925G-EX-K9=.
Ofrecemos 1 manuales en pdf Cisco CP-7925G-EX-K9= para descargar gratis por tipos de documentos: Ficha de datos
Comentários a estes Manuais